NORSOK QUALIFICATION

NORSOK M-650 Qualified Titanium Manufacturer

Standard Titanium has completed qualification testing to NORSOK M-650 for selected titanium materials and manufacturing routes.

The qualification records cover titanium plate, bar, forgings and, for Grade 5, titanium pipe, with acceptance by TÜV NORD (Hangzhou) Co., Ltd.

Status

Qualified

Standard

NORSOK M-650

Certificate No.

ZYXD-NORSOK-QTR01

ZYXD-NORSOK-QTR02

Valid to

July 6, 2028

Why It Matters

What NORSOK M-650 qualification means for you

NORSOK M-650 qualification provides documented evidence that defined manufacturing processes for specific titanium products have been tested and evaluated against the requirements of the NORSOK material qualification standard.

Qualified Manufacturing Routes

The qualification is tied to defined products, materials, processes and manufacturing conditions rather than being a general company-wide approval.

Independent Acceptance

The Qualification Test Records were reviewed and accepted by TÜV NORD (Hangzhou) Co., Ltd.

Defined Product Scope

The qualification identifies the specific titanium product forms covered, including plate, bar, forgings and pipe.

Defined Material Grades

Separate qualification records cover titanium Grade 2 and titanium Grade 5 material designations.

Tested Thickness Ranges

The records define both the tested thickness and the qualified thickness range for each applicable product form.

Support for Oil & Gas Procurement

NORSOK M-650 qualification can support supplier approval and material qualification requirements for projects that specify NORSOK-qualified manufacturing routes.

QUALIFIED PRODUCT SCOPE

Titanium products covered by the qualification

The NORSOK M-650 QTRs cover the following product forms.

Titanium Plate

Qualified for both Grade 2 and Grade 5 titanium under the respective QTRs.

Titanium Bar

Qualified for Grade 2 and Grade 5 titanium.

Titanium Forgings

Qualified forging routes are included for both Grade 2 and Grade 5.

Titanium Pipe

Titanium pipe is included in the Grade 5 qualification record.

Annealed Material

The manufacturing process listed in both QTRs includes annealing.

Controlled Heat Treatment

The records identify heat treatment by our partner as part of the qualified manufacturing route.

Certificate Details

Verification information

Our TÜV SÜD certificate covers the manufacture of titanium plate, titanium bar, titanium wire and titanium pipe used in civil aviation under AS9100D and ISO 9001:2015.

Standards

NORSOK M-650

Manufacturer

Shaanxi Standard Titanium Industry Co., Ltd.

Edition

TÜV NORD (Hangzhou) Co., Ltd.

Qualification Type

Qualification Test Record (QTR)

Certified address

Middle Section of Baotai Road, High-Tech Zone, Weibin District, Baoji City, Shaanxi Province, P.R. China, 721006

QTR No. 1

ZYXD-NORSOK-QTR-001

QTR No. 2

ZYXD-NORSOK-QTR-002

Materials

Titanium Grade 2 / Grade 5

Products

Plate, Bar, Forging, Pipe

Process

Anneal

Acceptance Date

6 July 2023

Qualification Valid Until

5 July 2028

Status

Qualified

Need the current certificate for supplier approval?

Need a copy of the full certificate or any additional quality or traceabiility documents for vendor qualification?

Contact Quality Team
Standard Titanium Co Logo

Mill Products

Finished Products

Pipe Fittings

Standard Titanium Co.

Knowledge Base

Contact Us
Standard Titanium Co.
Tell us about your project requirements

Send an Enquiry

Complete the form below and our team will get back to you shortly
We typically respond in one business day.