ISO 24034 specifies classification of solid wire electrodes, solid wires and rods used as consumables for fusion welding of titanium and titanium alloys.
The applicable edition and any published amendment should be verified when the material is ordered.
What ISO 24034 Covers
- Solid wire electrodes for titanium fusion welding.
- Solid titanium and titanium-alloy welding wires.
- Rods used for fusion welding.
- Classification of the consumable within the standard.
Important Distinction
ISO 24034 covers titanium fusion-welding consumables. It is not the technical-delivery standard for titanium strip used to manufacture welded tubes.
Related Standards
Ordering and Certification
Identify the complete ISO standard and required edition or amendment, material designation, product form, dimensions, condition and certification requirements. The MTR should reference the specification used for manufacture and inspection.
Standards note: This page is a practical overview and is not a substitute for the official standard. Standards are revised periodically, and requirements can vary by edition, product form and application. Always state the required standard and revision on the purchase order and verify compliance against the applicable specification and material test report (MTR).
